Tool & Die with Stamp Press Machines
Location: Nashville Tennessee
Description: The Onin Group, Inc. is looking of Tool & Die with Stamp Press Machines right now, this occupation will be placed in Tennessee. More complete informations about this occupation opportunity please read the description below. Tool and Die Setup and repair with Metal Stamping Presses
We are looking for experienced Tool & Die repair and rebuild. If you have 5+ years experien! ce in Tool & Die with Stamping presses we would like to talk with you. Please send resume or job details.
1) Conduct test runs with completed tools or dies to ensure that parts meet specifications; make adjustments as necessary.
2) Cut, shape, and trim blanks or blocks to specified lengths or shapes, using power saws, power shears, rules, and hand tools.
3) File, grind, shim, and adjust different parts to properly fit them together.
4) Fit and assemble parts to make, repair, or modify dies, jigs, gauges, and tools, using machine tools and hand tools.
5) Inspect finished dies for smoothness, contour conformity, and defects.
6) Lift, position, and secure machined parts on surface plates or worktables, using hoists, vises, v-blocks, or angle plates.
7) Measure, mark, and scribe metal or plastic stock to lay out machining, using instruments such as protractors, micrometers, scribes, and rulers.
8) Select me! tals to be used from a range of metals and alloys, based on pr! operties such as hardness and heat tolerance.
9) Set up and operate conventional or computer numerically controlled machine tools such as lathes, milling machines, and grinders to cut, bore, grind, or otherwise shape parts to prescribed dimensions and finishes.
10) Set up and operate drill presses to drill and tap holes in parts for assembly.
11) Smooth and polish flat and contoured surfaces of parts or tools, using scrapers, abrasive stones, files, emery cloths, or power grinders.
12) Study blueprints, sketches, models, or specifications to plan sequences of operations for fabricating tools, dies, or assemblies.
13) Verify dimensions, alignments, and clearances of finished parts for conformance to specifications, using measuring instruments such as calipers, gauge blocks, micrometers, and dial indicators.
14) Visualize and compute dimensions, sizes, shapes, and tolerances of assemblies, based on specifications.
! 15) Cast plastic tools or parts, or tungsten-carbide cutting tips, using pre-made molds.
16) Design jigs, fixtures, and templates for use as work aids in the fabrication of parts or products.
17) Develop and design new tools and dies, using computer-aided design software.
18) Set pyrometer controls of heat-treating furnaces, and feed or place parts, tools, or assemblies into furnaces to harden.
Requirements
Must have at least 5 years experience with Setting up Tool & Die's for Metal Stamp Presses.
Must be flexible and able to work up to 10 hours per day.
- .
If you were eligible to this occupation, please email us your resume, with salary requirements and a resume to The Onin Group, Inc..
If you interested on this occupation just click on the Apply button, you will be redirected to the official website
This occupation starts available on: Thu, 15 Aug 2013 05:49:16 GMT